By limiting the starting current and starting torque, the soft
starter is able to reliably prevent mechanical shock and grid
voltage drop during starting. By controlling the conduction angle
of the thyristor, the motor starting voltage is reduced and raised
to the rated voltage within the set starting time. With this
stepless control of the motor voltage, the motor can be regulated
according to the load characteristics of the driven machine, gently
accelerating the mechanical equipment.
This significantly improves the operating performance of mechanical
equipment, reduces maintenance costs and extends service life.
Widely used in water supply pumps, ventilation systems,
air-conditioning refrigeration station circulating pumps in water
conservancy, mines, factories, high-rise buildings, large shopping
malls and other places,
Fire-fighting and sprinkler pump control, etc.
| Item | Project Description |
| Applicable standards | GB14048.6-2016(IEC947-4-2) |
| Applicable motor type | Squirrel-cage three-phase asynchronous motors |
| Motor power | 11A……1260A(5.5~630kW) |
| Control Voltage | AC220V±15%;50Hz/60Hz;AC110V±15% |
| input | Rated Voltage | AC380V±15%;50Hz/60Hz;660V±15% |
| Adjustable start time | 1～120s adjustable |
| Adjustable stopping time | 0～120s adjustable |
| control mode | 1.Ramp voltage 2.Ramp current 3.Current limit mode |
| I/0 | Logic Inputs | 3 way(X1~X3) |
|
| Analog Outputs | 1 channel 4~20mA/0~10V |
| Relay outputs | 2 relay outputs |
| Run command inputs | Keyboard display unit given, control terminal given |
| RS485 communication given |
| Communication | Integrated communication protocols | Standard Modbus protocol, 1 channel |
| Display Unit | LCD display | Can display current, voltage, alarm and other motor parameters |
| Protection and monitoring | Short-circuit, over-voltage, overload, under-voltage, phase loss,
over-current, temperature protection |
| matrix | Location | Indoor, not subject to direct sunlight, no dust, corrosive,
flammable gases, oil mist, |
| water vapor, dripping water or salt, etc. |
|
|
| altitude | Altitude more than 1000m, the capacity should be reduced
accordingly, every increase of 100m, the current is reduced. |
| Environmental humidity | -10℃~+40℃; -40℃ or above shall be used at a reduced capacity. |
| Above 40℃ shall be used at reduced capacity |
| For every 1℃, the current shall be reduced by 2%. |
| Temperature | Less than 95%RH, no water droplet condensation. |
| Vibration | Less than 5 .9m/s2(0 .6g) |
| Storage Temperature | -40℃~70℃ |
| framework | Protection class | Ip20 |
| Cooling method | Radiator, natural cooling |
| Installation | Vertical installation in cabinet |
Note:
CK60 built-in bypass economic soft starter adopts two start-stop
control methods: panel giving and control terminal (two-wire and
three-wire) giving.
1. Two-wire control is hold signal, three-wire control is trigger
signal.
2. When two-wire control is adopted, panel control is invalid.
3. When three-wire control is used, panel control is effective.
4. When panel control is adopted, X3 and COM must be kept closed.
5. External button signal should be kept >200ms to be valid,
<200ms to be invalid.
